What Are The Wearing Instructions For Protective Clothing?

Jul 27, 2019

Leave a message

1. The protective clothing must be inspected and tested for air pressure to ensure that there are no defects. Also, protective clothing must be selected according to the purpose.

2. However, it is necessary to apply an anti-fogging agent to the sight glass of the protective clothing in accordance with the recommended instructions.

3. Choose two people “cooperative organization”, that is, there is another person to help when wearing protective clothing.

4. Underwear should be worn in protective clothing. At least, it is recommended to wear long sleeves and trousers, or long “underwear”. Should wear refractory underwear.

5. Remove personal items that may damage protective clothing, such as pens, badges, jewelry, etc.

6. Take off your shoes (this can be omitted when wearing a protective suit with long rubber boots). Some long rubber boots do not allow outdoor shoes to be worn.

7. Roll the trousers into the stockings so that you can easily wear the trousers and long boots of the protective suit.

8. If using a self-contained air breathing apparatus, inspect and install the equipment, complete all connections, and adjust to the manufacturer's requirements, unless the breathing apparatus requires it, do not wear the top cover.

9. If using the snorkel air supply system, inspect and complete all connections and commissioning, unless wearing the mask, do not wear the mask.

10. Sit and put your legs into protective clothing.

11. Put your feet in the jacket and pull off the splash guard on the boot. (Note: Work boots should be 1 to 2 larger than the boots that are usually worn, so that there is enough room to put the boots of the protective suit into the boots.)

12. Open the air supply device, wear the cover, and make sure the air supply system is working properly.

13. Stand up and tie the inner belt, if any.

14. Put your arms and head into the protective suit, pull up the zipper, and close the zipper cover.

15. Ask the assistant to check if the zipper and zipper cover are fully tightened, the mask field of view is clear, all air lines are tightly engaged, and the protective suit is in optimal working condition.



Send Inquiry