At present, there are many domestic enterprises producing woven fabrics, but the quality of the woven fabrics produced by each enterprise varies greatly. For the fiercely competitive textile industry, in order to seize the market and win more customer orders, it is necessary to strictly product quality and fully prepare for the production of textiles, so as to reduce the quality in the production and processing of non-woven fabrics. problem. So what are the preparations that can not be ignored before the production of non-woven fabrics
The preparation work that can not be ignored before the production of non-woven fabric:
1. Put in the winding rod, start the host power supply and inverter controller, and then slowly turn the inverter switch.
2. When counting is needed, the number of sheets and meters required by the counter can be set arbitrarily.
3. According to the characteristics of various non-woven fabrics, adjust the two expansion forces of the fabric to make the fabric not slack.
4. If the machine's spun cloth outlet hole is uneven, it can be adjusted evenly with the adjustment device of the spiral punching knife.
5. When the product is shipped too much, the air pressure regulator of the product can be used for adjustment.
6. After turning on the power for debugging, you can speed up appropriately and observe whether the adjustment results of the above steps are normal. If it is not normal, carefully check which step is away from the problem, and then adjust; if it is normal, the production speed can be set to the mechanical folding state.
Preparation is one of the very important links in the production and processing of non-woven fabrics. Adequate preparations must be made before the production and processing of non-woven fabrics in order to effectively avoid quality problems in the production process and to stand out among many textile enterprises , So as to get more production orders!
